Cold Bore Shot?

[Whelenon]

Although I have seen this in bolt guns (as an example look at the target I posted of my Swede 6.5x55 in another thread) it is more prevalent in self loading firearms. The first round is chambered by the op-rod or slide and not by the action of a fired round which is more vigorous. Try this, when chambering the first round pull the op-rod sharply to the rear and let it snap forward rather than closing the bolt with the bolt release. This fully compresses the recoil spring as would occur during normal cycling. I also make it a habit to palm smack the forward assist when charging the rifle. It has helped in the past for me and it's free. If you try this and it makes a difference or not, I would appreciate the feedback.

I tried your suggestion, all rounds fed from the mag, sorry, no improvement. But at least it's consistent, at 50yds, first shot was an inch low.



Kelm,
As far as cleaning, I don't very often. Every 300-400 rounds and it will get a thorough cleaning.

I guess come deer hunting I'll have to aim a tick low on that neck shot.