Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12.5 PSA Build
#1
Just finished setting up this gun. Haven't shot it yet, need to sight in my muzzleloader this week so I'll get this one zeroed then.

I used one of the new P80 lowers, it's a bit bulky but fit is good to the PSA upper and feels rugged.

The overall length from muzzle to back of receiver extension is 26.5" so I put a magpul vfg on it.

Put magpul mlok covers on, which I really like, has nice grip and keeps your hands off bare aluminum.

BCM mod 3 grip

Tailhook Mod 2, this thing is awesome, can't recommend enough for pistol builds. Got it on Big Daddy Unlimited for $104

Athlon Talos 1-4

I'll report back with the range results, haven't done any accurizing (bedding barrel, polishing feed ramps, etc) but plan to after first range trip.

[ATTACH=CONFIG]13220[/ATTACH] [ATTACH=CONFIG]13221[/ATTACH]


Attached Files
.jpg   20181125_101910 (1024x768).jpg (Size: 665.95 KB / Downloads: 239)
.jpg   20181125_102128 (1024x768).jpg (Size: 590.8 KB / Downloads: 231)
Reply
#2
I just returned from the range and had good results. After sighting in my muzzleloader I zeroed the new 12" psa upper. Shot 20 rounds messing with the gas block and finding my zero. After that I took it out to 100 yards and shot two 5 round groups:

Shooting 100g Wolf Classic

1st group 1 1/2" @ 100yrds
[ATTACH=CONFIG]13244[/ATTACH]

2nd group 1 3/8" @ 100yrds
[ATTACH=CONFIG]13243[/ATTACH]

Im pretty happy with those results! I wanted to shoot more but it was 28F with a breeze in my face. Now I think I'll hold off doing any accurizing until I get a few hundred rounds through it and see if it still shoots as good.


Attached Files
.jpg   IMG_20181129_24331.jpg (Size: 45.72 KB / Downloads: 31)
.jpg   IMG_20181129_13474.jpg (Size: 56.95 KB / Downloads: 29)
Reply
#3
Looks good, thanks for the update.
Reply
#4
Nice, i was wondering how well these would run.
Reply
#5
With that 1-4 scope I couldn't see my hits at 100 so when I walked out and saw the groups I was pleasantly surprised.

Speeking of the scope, I do have a couple gripes.
The turrets don't lock and the clicks are pretty weak.
The magnification ring is way too tight.

Other than that its reticle is nice and thin, the illumination is daylight bright, and the glass is half way decent like a vortex strike eagle.
Reply
#6
I would be happy with those groups from Wolf ammo. Nice
Reply
#7
What scope mount is that? Looks like a fairly high one. Great groups with Wolf. I've got 640 rounds coming to test my new build with.
Reply
#8
Nice looking rifle! Those are pretty dang good groups for Wolf. Nice shooting.
Reply
#9
Rangerofthenorth Wrote:What scope mount is that? Looks like a fairly high one. Great groups with Wolf. I've got 640 rounds coming to test my new build with.

It's a Primary Arms mount, the el cheapo one you get for like $20. I've been meaning to replace it but It's held zero for about 500+ rounds.
Reply
#10
Nice Rig, I'm building a pistol also. I thought you couldn't legally use a verticle foregrip on a pistol.
Reply
#11
I’m pretty sure you can’t
Baroid Wrote:Nice Rig, I'm building a pistol also. I thought you couldn't legally use a verticle foregrip on a pistol.
Reply
#12
Over 26" I think he's goodWink
Reply
#13
Ha !! Werd...
Reply
#14
Rangerofthenorth Wrote:Over 26" I think he's goodWink

Over 26" OK. Under 26" not OK. Up to you to determine the logic on that.

In NY, not OK no matter the length. It makes it an "assault weapon". Apparently that feature will kill you deader, so not allowed. It's too scary.
Reply
#15
1075 tech Wrote:Over 26" OK. Under 26" not OK. Up to you to determine the logic on that.

In NY, not OK no matter the length. It makes it an "assault weapon". Apparently that feature will kill you deader, so not allowed. It's too scary.

Yeah, I think the vfg must add 'extra' terminal assault velocity on short barreled weapons.
Reply


Forum Jump:


Users browsing this thread: