319 lilja test day failure

[Adam Lilja]

Interesting proposition. Would they be cut with the same reamer(s) as on the production line?

Yar matey

[JASmith]

Do you plan to make a partial section so we can see the shoulder, neck, freebore, and throat?

[Adam Lilja]

Pds sent me this PM a week or so ago. Just in the talking stage right now, but I think I would make them similar to this.

Adam,
It would be a nice option for Dan to offer one of these gauges for his Grendel barrels. http://www.bullberry.com/reloading_supplies.html. With all the issues with Grendel owners trying to find seating depths on their rifles bet you'd sell a bunch of these.

Any chance?

Paul

[Kikn]

I would be interested in having one as long as i could keep an arm or a leg intact :-p

[JASmith]

Adam,

Thanks for taking Paul's suggestion seriously.

The link is indeed to the chamber I have. The only problem I have with the 6.5 Grendel Chamber Gauge from there is that I can't see the entire throat.

Regards

[BjornF16]

If we offered guages for our Grendel drop ins... ?

...I'd order one.

[burkew23]

I'd definitely be interested...

[explorecaves]

...I'd order one.

I'll be ordering 2 as soon as they are available along with 2 of the other item we have been talking about.

[cory]

Pds sent me this PM a week or so ago. Just in the talking stage right now, but I think I would make them similar to this.

Adam,
It would be a nice option for Dan to offer one of these gauges for his Grendel barrels. http://www.bullberry.com/reloading_supplies.html. With all the issues with Grendel owners trying to find seating depths on their rifles bet you'd sell a bunch of these.

Any chance?

Paul

I'll take one. Let me know if you decide to sell them and I'll send an email to everyone that was in on the group buy.

[cst]

Put me in for one too.

[Smud Dude]

And 1 for me. Cory, you have a great idea, though not everyone in the group buy loads their own I'd think most do.

[explorecaves]

Adam - your inbox is full.

[Buster]

If we offered guages for our Grendel drop ins... ?

Do we need to start a group buy for these units?

[Kikn]

Not trying to deter the group buy here at all.... but back on track here.

I've sized some once fired brass (all/mostfrom my lilja build)

I've checked and the few that i checked chambered OK.

I'm going to make up some more of the same and hopefully get to the range tomorrow.

I got my trijicon back after sending it back for a third time in the last year.and I am going to mount it to my older 16" and test those other rounds and have a comparison between the two hopefully.

[Kikn]

Well about 4 hours later I have finally finished reloading 60 test rounds... now all I have to do is mount a scope and I'll be good to go tomorrow.

Amazing how long it takes to reload ammo...and how short a time it takes to fire them off....

But after leaving the tumbler on and going to work for 9 hours my brass is shinier than factory ammo

[Kikn]

Made it to the range today I started a new thread.

To see more bad from yours truly just follow this link to my next debacle

http://www.65grendel.com/forum/showthrea...AA-16-quot