Order for a box of Hornady ELD-Match 140gr have been placed.
Will probably be few weeks before I have them on the leading bench at home, but this gives some time for planning.
Will be testing this bullet and see what speed and accuracy I can get. Will be using the Magnetospeed for MV-reading.
This will be done with the following components:
Gun: Rem 700 bolt gun, 20" Jury barrel 1:7,5 twist
Bullet, the 140gr ELD-M (of course)
Lapua brass
CCI400 primers
VV N140 powder
For starting load with this powder, I will probably go with 26.0gr. Step up with small increments of 0.2gr until about 28.0gr.
Any thoughts on the starting load?
I have the N140 powder at home, but also the Norma N203B.
Will probably be few weeks before I have them on the leading bench at home, but this gives some time for planning.
Will be testing this bullet and see what speed and accuracy I can get. Will be using the Magnetospeed for MV-reading.
This will be done with the following components:
Gun: Rem 700 bolt gun, 20" Jury barrel 1:7,5 twist
Bullet, the 140gr ELD-M (of course)
Lapua brass
CCI400 primers
VV N140 powder
For starting load with this powder, I will probably go with 26.0gr. Step up with small increments of 0.2gr until about 28.0gr.
Any thoughts on the starting load?
I have the N140 powder at home, but also the Norma N203B.
Comment