Tweet
Hey all I just wanted to share my experience with my old 650 casefeeder while reloading 6.5 Grendel. I've used it for years but often had issues feeding reliably. Maybe 15-20 out of 100 required manual intervention. I did some research and even asked Dillon. The conclusions were to use large pistol plate with a washer or two underneath. This was very slow and also left the last 5-10 manual. I also saw that some people added a plastic card with duct tape to help sort. I really didn't like these issues.
I decided to try the large rifle casefeed plate and it worked 100% with no weird modifications. If you get cases that feed neck first all you have to do is very slightly close the feed gate ( mine only needed about 1/8 th inch closure ). I hope this helps someone.
I decided to try the large rifle casefeed plate and it worked 100% with no weird modifications. If you get cases that feed neck first all you have to do is very slightly close the feed gate ( mine only needed about 1/8 th inch closure ). I hope this helps someone.