The 95 gr Vmax and H335 powder - min/max

[603 Country]

[Harpoon1]

[sbowhuntr]

I run 29.9g h-335 with the 95g v-max, might not be great in your gun but mine likes it. Hornady is a bit reserved on all their data compared to other sources. I usually start low and work up and most of the time if I'm using hornady info to start I end up beyond their max compared to say Hogdon data.

[603 Country]

[sbowhuntr]

I see no signs of pressure at all running 29.9g 335 and that's beyond Hornady's max.

[Harpoon1]

[603 Country]

[sundowner]

I use 31.0gr H335 in my 95gr VMAX loads .

[Scrape hunter]

What seating depth are you fellers using with the 95 grain v-max ?

[sbowhuntr]

What seating depth are you fellers using with the 95 grain v-max ?

2.245 is what Hornady list's in their book with the 95g vmax.

[myrifle]

What seating depth are you fellers using with the 95 grain v-max ?

Only your barrel can answer that for you.

[603 Country]

[Owyhee H]

Not the V-max but wtih a T-rex 95gr (LFP so a little different) I am arriving on a node around 29.7-30 most likely 29.9. I saw pressure signs way before Hodgdon data max.

[LRRPF52]

Not the V-max but wtih a T-rex 95gr (LFP so a little different) I am arriving on a node around 29.7-30 most likely 29.9. I saw pressure signs way before Hodgdon data max.

[Owyhee H]

Understood and that is why I shared the bullet being used. I looked at many sources before developing my load and hodgdon is way above other sources in charge and velocity for 95grain projectiles. I have had good luck with Hodgon data in the past but always reference several sources.