I know this subject has been beat to death but I can not find the answer iam looking for. I have some federal 210 large rifle primers laying around and was wanting to use them withe the wolf brass along with 8208 XBR and 123gr nosler cc bullets. Will these primers work???? Also what is the recommended primers for the horady brass using same powder and bullets??? STANDARD OR MAGNUM????
Primers for wolf and hooray brass
Collapse
X
-
The recommended primer for all small primer brass is a Small Rifle Magnum. Some have used others, but that is the recommended primer.
Large primer brass, (Wolf) may use any large rifle standard primer, though most use Wolf.
USE CAUTION WITH LOAD DEVELOPMENT, REGARDLESS!
-
-
Originally posted by DIESEL758 View PostThanks, I can't find any reload data for the nobler 123 cc hpbt. I need a starting point, or if anybody has any data they would like to share for this bullet.
Comment
-
-
I apologize for the format here, it is in a PDF file and I am inept with computers. Also, I woke up with my back in rough shape and am loaded up on doctor smack. With moderator approval I will find a way over the weekend to post all of the applicable pages from the book
6.5 Grendel - 123/125 grain
Hornady
BARREL Length/Make
BARREL Twist 1-8"
Custom Competition™ 0.510
POWDER Grains Case Volume F.P.S.
RL15 28.0 * MAX. 2398 97% 2398
27.0 2305 94% 2305
26.0 2212 90% 2212
IMR 4895 28.0 * MAX. 2414 103% 2414
27.0 2346 99% 2346
26.0 2278 95% 2278
IMR 8208 XBR 27.0 MAX. 2420 99% 2420
26.0 * 2324 95% 2324
25.0 2228 92% 2228
TAC 27.5 MAX. 2438 94% 2438
26.5 * 2334 90% 2334
25.5 2230 87% 2230
A-2520 28.5 * MAX. 2484 98% 2484
27.5 2392 95% 2392
26.5 2302 91% 2302Last edited by Guest; 01-04-2013, 02:58 PM.
Comment
-
Comment