JP Grendel & Barnes Bullets

[81police]

These are AA loaded 120gr. TSX's which I've made a previous post on. I thought I had a bad scope as things seemingly went blurry overnight. I took the scope off, inspected, and found out my scope covers had loosened the objective lens cap. Tightening that back up sorted me out. So I reset everything and the results were just like before.

I can't talk enough about JP Enterprise products, this gun has never let me down, and shoots tighter than any other rifle I've ever owned. Upper is an 18" reverse contour w/ thermal dissipator and bennie cooley small frame comp.

IMG_20150524_175424330.jpg

[Kikn]

Nice. did you measure all 6 together? looks about 1"

I'm wanting to work up some barnes loads with the 120 TSX/TTSX have you broke the bullet down to see the powder type and weights ect.?

[81police]

Since they were two separate groups (about 30min apart) I didn't measure them together.

I haven't got into reloading yet so no I haven't broken them down.


Here's one from a year ago, same rifle & ammo but better group. Same distance @ 100 yards

1223131007.jpg

[LRRPF52]

I'm getting ready to do some work-ups with 120gr TSX in 2 different 18" barrels. I can load out to 2.275" with both of them. Both have a SAAMI Grendel chamber.

I'm using CFE under them.