Well the efforts of this forum to increase the awareness and adoption of the 65G AR is working. I started with a Howa Mini and love it I have always been a bolt fan and opposed semi-auto guns, but I have been thinking about multiple shots on hogs so the AR has gotten more of my attention lately. If DNS would stop posting youtube videos this wouldn't have happened, damn you DNS! Anyway then I come across this good deal on a group buy bolt and think what the heck I can get some parts eventually and build a hog gun so I try and buy 2. Sold out and I only get one, so what to do with he remaining cash, I already paid BFT? Buy a 12" GB barrel with it and some more cash. Well that shot my budget but before I even know what is happening I have gone and ordered almost everything to build a Light weight Hog hunting Pistol with the intention of eventually getting the forms for a SBR and a Can. I have searched for the cheapest quality parts I can get away with but it is still way more than I planed to spend. Damn you All!!! I was perfectly content until I stated reading this site!! Not to mention I still have to start reloading so I can make all of this work even better.
So here is the build list I hope it is going to all work together. I seriously know nothing about the AR except what I have read on this site and a few other google searches.
Faxon GB 12" Barrel
Lehigh Defense GB Bolt
Mag Tactical Ultra-Lightweight Magnesium Stripped AR-15 Lower Receiver - Premium Grade
AR15-A3 Stripped Upper Receiver, Mil Spec, W / Black Hard Anodized Finish - U.S. Commercial Contractor
Upper Receiver Parts Kit Complete W / Ejection Port Dust Cover Assembly and Forward Assist Assembly
AR-15 M4 Charging Handle Mil-Spec Quality
RightToBear AR15 Lightweight Carrier - Black Nitride (carrier only)
WMD Guns AR15 Nickel Boron NiB-X Cam Pin
Omega Mfg Firing Pin Retaining Pin Mil Spec AR15 M4 M16
Omega Mfg AR-15 M16 M4 Titanium Firing Pin 5.56 NATO .223
Tactical Superiority Mil Spec Quality Lower Parts Kit Lpk For Ar-15
RTB AR15/M4 REDUCED POWER Carbine Buffer Spring
PXTreme Adjustable Super Light Low-profile Steel Gas Block Mk1.5 - .750
Spikes Tactical Melonited Treated Black Mil Spec Gas Tube (Carbine)
KAK buffer tube and Brace
Pistol Buffer Tube Complete Kit Heavy Duty W/ End Plate, Foam Cover (I like options and needed the buffer)
10" Inch AIR LITE 7.4 oz Ultra Slim Keymod Free Float Handguard BLK
C-Products 6.5 Grendel Magazines - 10 Round
I still need:
Optics(will have to wait a while before I get anything good might get cheap dot sight for now?)
What else am I forgetting?
I am shooting for as light as I can get for the pistol, trying to make the system cycle as slow and light as I can with the intention of reducing recoil, felt and cycle derived, and going subsonic when I get the Can. From what I can determine this would require the light BCG, adjustable gas, light buffer spring, hand loads to suit. Why not I mean its not like I have ever fired an AR before, I'm just too dumb to know what can't be done. In any event I bet it will shoot a hog at 100yd with some Hornady 123s.
So here is the build list I hope it is going to all work together. I seriously know nothing about the AR except what I have read on this site and a few other google searches.
Faxon GB 12" Barrel
Lehigh Defense GB Bolt
Mag Tactical Ultra-Lightweight Magnesium Stripped AR-15 Lower Receiver - Premium Grade
AR15-A3 Stripped Upper Receiver, Mil Spec, W / Black Hard Anodized Finish - U.S. Commercial Contractor
Upper Receiver Parts Kit Complete W / Ejection Port Dust Cover Assembly and Forward Assist Assembly
AR-15 M4 Charging Handle Mil-Spec Quality
RightToBear AR15 Lightweight Carrier - Black Nitride (carrier only)
WMD Guns AR15 Nickel Boron NiB-X Cam Pin
Omega Mfg Firing Pin Retaining Pin Mil Spec AR15 M4 M16
Omega Mfg AR-15 M16 M4 Titanium Firing Pin 5.56 NATO .223
Tactical Superiority Mil Spec Quality Lower Parts Kit Lpk For Ar-15
RTB AR15/M4 REDUCED POWER Carbine Buffer Spring
PXTreme Adjustable Super Light Low-profile Steel Gas Block Mk1.5 - .750
Spikes Tactical Melonited Treated Black Mil Spec Gas Tube (Carbine)
KAK buffer tube and Brace
Pistol Buffer Tube Complete Kit Heavy Duty W/ End Plate, Foam Cover (I like options and needed the buffer)
10" Inch AIR LITE 7.4 oz Ultra Slim Keymod Free Float Handguard BLK
C-Products 6.5 Grendel Magazines - 10 Round
I still need:
Optics(will have to wait a while before I get anything good might get cheap dot sight for now?)
What else am I forgetting?
I am shooting for as light as I can get for the pistol, trying to make the system cycle as slow and light as I can with the intention of reducing recoil, felt and cycle derived, and going subsonic when I get the Can. From what I can determine this would require the light BCG, adjustable gas, light buffer spring, hand loads to suit. Why not I mean its not like I have ever fired an AR before, I'm just too dumb to know what can't be done. In any event I bet it will shoot a hog at 100yd with some Hornady 123s.
Comment