Muzzle Device recommendations

[shermanempire]

So the last part of my build is a muzzle device, looking for something cheap and simple. The rifle is primarily built for target and maybe hunting so looking for things that will work for those purposes. The barrel length is 18 inches with 5/8x24 threads. I've been looking at the cnc warrior type 74 brake in 5/8 but it doesn't say if its for .30cal

[Mad Charlie]

VG6 Gamma, A2 type, or just a thread protector.

[VASCAR2]

[grayfox]

VG6 gamma in 6.5 caliber. After trying many different ones, this one is the best for the best price point. Armorally usually has them for the best online price I've seen.

one more thing, don't use crush washers, use the accuwashers or a 5/8-24 jam nut, along with a little blue loktite. Crush washers cause a non-uniform torque stress that can mess up your accuracy.

[NightStalker]

I went with a 30 cal A2 style FS. Cheap and effective

[tdbru]

sixfivearms has a light weight very effective simple flash hider that is slim.

http://www.sixfivearms.com/product/monster-ultralite-flash-suppressor/

-tdbru

[Rangerofthenorth]

Ar15 safe space has vg65's for $58 and vg6 devices for 5.56 for $49. A few weeks ago they were $38.

[Cotay]

Ar15 safe space has vg65's for $58 and vg6 devices for 5.56 for $49. A few weeks ago they were $38.

My Grendel rifles have the following muzzle devices:

12" AR Grendel (Pistol) has a Breek Arms outside thread three prong flash hide (30 cal) and a Breek Arms Castle Blast Shield: https://breekarms.com/upper-parts/mu...uzzle-devices/
16" AR Grendel has a VG6 Gamma 6.5
18" AR Grendel (SPR) has a VG6 Epsilon 6.5
20" AR Grendel (Hunting) has a Kaw Valley Linear Comp 30 cal
20" Howa Mini Heavy Barrel Grendel has a VG6 Lambda PRS65
20" How Minie LW Barrel Grendel has no threads. :-)

I have one other 18" AR Grendel that is being converted to 300 Blackout but it currently has another VG6 Gamma 6.5.

[sbowhuntr]

I will 2nd a simple and cheap thread protector, flash hiders are loud and unnecessary and honestly the 6.5grr has minimal recoil. Ive used a few different kinds over the years and just prefer a simple traditional look to my barrels. $20 delivered is cheap enough to give one a try. Only rifle I have a break on is my 450 bushy and it does mitigate recoil nicely.

[js8588]

Wilson Combat Q-Comp

[drewthebrave]

At $12 + shipping, this KAK compensator is pretty solid:

https://www.kakindustry.com/ar-15-parts/upper-parts/barrels/barrel-parts/flash-hiders-and-muzzle-brakes/5-8-24-threads/comp-308

The muzzle devices that I've had experience with include the YHM Phantom Comp, VG6 Gamma/Epsilon, WCI Comp and the KAK comp above. The YHM and the Phantom were most effective, but I get constant complaints from my neighbors at the range (usually my shooting buddies). The WCI and the KAK are much less obnoxious to others, but not quite as effective at taming muzzle climb. If I could legally own a suppressor in CA, that's the route I'd go.

[6.5 Grendel]

I will 2nd a simple and cheap thread protector, flash hiders are loud and unnecessary and honestly the 6.5grr has minimal recoil. Ive used a few different kinds over the years and just prefer a simple traditional look to my barrels. $20 delivered is cheap enough to give one a try. Only rifle I have a break on is my 450 bushy and it does mitigate recoil nicely.

I will third that...I only have a break on my 450 Bushmaster

[Mustangfreek]

.....suppressor....

[biodsl]

You'll probably pay more for shipping than the flash hider right now at Midway.

https://www.midwayusa.com/product/1019568176

[burnsy13]

.....suppressor....

Yuuuup

I like the Rugged Micro 30 on my 12" SBR, and the Rugged Surge on my 18"