Here is what I did to make the Grendel work in my Savage model 11.
Currently it sits in MDT LSS chassis, for hunting I swap it over into the savage plastic stock with a Atlasworxs bottom metal.
I modified the 223 MDT mag with a dremel and heat gun to make the lips work, with the 223 accurate mag I opened up the lips to make it work.
Both feed with no issues and I have no extraction problems with the original savage parts and the ppg bolt head.
The bottom metal was bedded with jb weld.
The MDT mag has a 140 gn eldm loaded at 2.394.
IMG_0176[2].jpg
Currently it sits in MDT LSS chassis, for hunting I swap it over into the savage plastic stock with a Atlasworxs bottom metal.
I modified the 223 MDT mag with a dremel and heat gun to make the lips work, with the 223 accurate mag I opened up the lips to make it work.
Both feed with no issues and I have no extraction problems with the original savage parts and the ppg bolt head.
The bottom metal was bedded with jb weld.
The MDT mag has a 140 gn eldm loaded at 2.394.
IMG_0176[2].jpg
Comment