So got it together and tested at 100 over the weekend and am very pleased with the result.
Parts list:
Carbine Buffer tube
JP Silent Capture Buffer Spring - JPSCS2-15H2
JP LMOS™ Carrier Group with 6.5G JP EnhancedBolt™
VTLOR stock
Raptor Charging handle
SLR HELIX 15" MLOK Handguard
SLR Sentry 7 Clamp On Adjustable Gas Block - Titanium
SLR Black Nitrite Mid Length Gas Tube
Satern 18" Medium Profile Cut 5R 1:8.75 twist
Rugged Suppressors 5/8x24tpi flash hider
Battle Arms Dev. (BAD) BAD556-LW Lightweight 7075-T6 Billet Receiver Set
BAD Titanium take down pins
BAD BAD-CASS-SA Combat Ambi Safety Selector
BAD BAD-EMR Enhanced Magazine Release - Anodized BLACK
BAD Titanium grip screw
Norgon Ambi Catch
Gissele SSA-E Trigger
SWFA 1-6x24
ADM QD 0 MOA mount
(To be replaced with a SWFA SS 5-20x50MM scope and AADMOUNT 20 MOA mount)
Weight: Light
Shooting it was ranging around 1/2 MOA. I expect it will be improved with a better scope.
We set up steel out to 1,000 so I will not be limited to 400 at my property going forward.
Those that were there were amazed at the amount of energy transferred to the steel for such a small cartridge, as well as the lack of felt recoil (I attribute that to the SLR adjustable gas block and heavy buffer).
Special consideration(s):
1) Bedded with Loctite 234772 Green 620 High Temperature Retaining Compound, 10 mL Bottle, with release agent applied to extension
2) Upper face trued using Brownells truing tool and valve lapping compound.
Only picture I have:
Parts list:
Carbine Buffer tube
JP Silent Capture Buffer Spring - JPSCS2-15H2
JP LMOS™ Carrier Group with 6.5G JP EnhancedBolt™
VTLOR stock
Raptor Charging handle
SLR HELIX 15" MLOK Handguard
SLR Sentry 7 Clamp On Adjustable Gas Block - Titanium
SLR Black Nitrite Mid Length Gas Tube
Satern 18" Medium Profile Cut 5R 1:8.75 twist
Rugged Suppressors 5/8x24tpi flash hider
Battle Arms Dev. (BAD) BAD556-LW Lightweight 7075-T6 Billet Receiver Set
BAD Titanium take down pins
BAD BAD-CASS-SA Combat Ambi Safety Selector
BAD BAD-EMR Enhanced Magazine Release - Anodized BLACK
BAD Titanium grip screw
Norgon Ambi Catch
Gissele SSA-E Trigger
SWFA 1-6x24
ADM QD 0 MOA mount
(To be replaced with a SWFA SS 5-20x50MM scope and AADMOUNT 20 MOA mount)
Weight: Light
Shooting it was ranging around 1/2 MOA. I expect it will be improved with a better scope.
We set up steel out to 1,000 so I will not be limited to 400 at my property going forward.
Those that were there were amazed at the amount of energy transferred to the steel for such a small cartridge, as well as the lack of felt recoil (I attribute that to the SLR adjustable gas block and heavy buffer).
Special consideration(s):
1) Bedded with Loctite 234772 Green 620 High Temperature Retaining Compound, 10 mL Bottle, with release agent applied to extension
2) Upper face trued using Brownells truing tool and valve lapping compound.
Only picture I have:
Comment