Putting my new hunting Grendel together this weekend. Major Parts:
- Noveske Forged Lower I had in the safe
- Vltor MUR Upper Receiver
- JP 18" Lightweight Barrel
- Noveske 16.7" Rail
- POF Trigger Group
- JP Parts Kit
- B5 Carbine Stock
I will end up using an adjustable gas block since this will see some part time use suppressed.
I've done dozens of AR15s and AR308s as well as an SBR Blackout. I can't imaging there is anything really different BUT - Is there anything I should be aware of that may be different when assembling a Grendel?
- Noveske Forged Lower I had in the safe
- Vltor MUR Upper Receiver
- JP 18" Lightweight Barrel
- Noveske 16.7" Rail
- POF Trigger Group
- JP Parts Kit
- B5 Carbine Stock
I will end up using an adjustable gas block since this will see some part time use suppressed.
I've done dozens of AR15s and AR308s as well as an SBR Blackout. I can't imaging there is anything really different BUT - Is there anything I should be aware of that may be different when assembling a Grendel?
Comment