Oi,
So I wanted to build a new AR after trading away my 5.56 and before all the madness hits with all these shootings and what not. I was persuaded to go with 6.5 Grendel when I shot my brothers and it was just tits so I was convinced I needed one in my life.
Anyway here is my build thus far with a few pics. I am building this thing piece by piece as I have time and the budget to buy parts lol. This is mainly for posterity and I will be using this as my build tread and reporting operation once it gets up and running.
Parts still needed:
1. Handguard/barrel nut
2. Gas Block
3. Gas tube
4. Forward assist
5. Port door
7. Mag catch
8. Safety
9. springs and detent kit
10. scope and mount
11. magazines
12. Stock
13. Ammo
Parts already acquired:
1. Stripped upper (guntec billet)
2. Stripped lower (Spartan billet)
3. Barrel (Dez Arms 1:8 18" melonite SS HBAR spiral flute mid length gas Grendel II chamber headspaced with A.A bolt)
4. Charging handle (Strike industry)
5. Bolt/bolt carrier (Odinworks 6.5 grendel)
6. Trigger group (spikes tactical NTFE)
7. Takedown pins (2A Ti)
8. Muzzle device (Procomp surefire .308)
9. Buffer tube (KVP 4.3oz heavy buffer)
10. Gas Block (Superlative arms .750 bleed off gas block clamp on melonite finish 416SS)
11. Stock (Magpu CTR in FDE with larue Risr in black)
12. Ejection port cover (Strike poly door black multi cal)
13. forward assist (strike enhanced melonite)
14. Gas tube (WMD melonite mid length)
15. Mag catch (mil spec with Troy extended release lever)
0713161914.jpg0621161546.jpg0713161850.jpg
So I wanted to build a new AR after trading away my 5.56 and before all the madness hits with all these shootings and what not. I was persuaded to go with 6.5 Grendel when I shot my brothers and it was just tits so I was convinced I needed one in my life.
Anyway here is my build thus far with a few pics. I am building this thing piece by piece as I have time and the budget to buy parts lol. This is mainly for posterity and I will be using this as my build tread and reporting operation once it gets up and running.
Parts still needed:
1. Handguard/barrel nut
2. Gas Block
3. Gas tube
4. Forward assist
5. Port door
7. Mag catch
8. Safety
9. springs and detent kit
10. scope and mount
11. magazines
12. Stock
13. Ammo
Parts already acquired:
1. Stripped upper (guntec billet)
2. Stripped lower (Spartan billet)
3. Barrel (Dez Arms 1:8 18" melonite SS HBAR spiral flute mid length gas Grendel II chamber headspaced with A.A bolt)
4. Charging handle (Strike industry)
5. Bolt/bolt carrier (Odinworks 6.5 grendel)
6. Trigger group (spikes tactical NTFE)
7. Takedown pins (2A Ti)
8. Muzzle device (Procomp surefire .308)
9. Buffer tube (KVP 4.3oz heavy buffer)
10. Gas Block (Superlative arms .750 bleed off gas block clamp on melonite finish 416SS)
11. Stock (Magpu CTR in FDE with larue Risr in black)
12. Ejection port cover (Strike poly door black multi cal)
13. forward assist (strike enhanced melonite)
14. Gas tube (WMD melonite mid length)
15. Mag catch (mil spec with Troy extended release lever)
0713161914.jpg0621161546.jpg0713161850.jpg
Comment