Just finished installing my PF 20" Criterion barrel I received this afternoon in my 2nd Grendel build, I actually started this one first but threw together another Grendel while waiting for my barrel. Anyway here are the build specs:
(1st Grendel)
Lower:
CMT UHP15A receiver
CMT UHPR Mod2 15" handguard
BAD enhanced pivot & takedown pins
BAD enhanced bolt catch
BAD combat ambi safety selector
BAD extended magazine release
Geissele HSNM trigger
Larue APEG grip
JP silent captured recoil spring
Magpul PRS gen3 stock
Upper:
CMT UPUR1 receiver
Forward Control Design low drag forward assist
Strike Industries enhanced dust cover
AXTS Raptor charging handle
Sharps Rifle Co balanced bolt carrier NP3+
PF gas block & gas tube
PF 6.5 grendel bolt
PF 20" Criterion 6.5 grendel barrel (bull profile, bead blasted, rifle gas)
CMT 6.5.jpg
I just ordered an LMD muzzle brake (bead blasted to match the barrel) from PF last night. I am planning on a Larue LT745 QD 20moa mount,Vortex Viper PST gen2 5-25x scope and Atlas bipod to top it off.
PF Criterion 20in 6.5.jpgPF LMD 6.5.jpg
(2nd Grendel)
Lower:
Anderson AM15 receiver
DPMS LPK
Geissele SSAE trigger
BAD enhanced magazine release
Larue APEG grip
Strike Industries flat wire buffer spring (going to be playing with buffer weight as soon as the snow melts off my range, since I can't leave anything alone, works fine with standard carbine buffer though)
Magpul MOE SL stock
Upper:
Brownell's receiver
SLR Helix 13.7" handguard
CMMG forward assist
Colt dust cover
BCM Gunfighter mod4 charging handle
AIM nitrided bolt carrier
AA 6.5 grendel bolt
AA 16" Lightweight barrel
AA A2 flash hider
AA 16in 6.5.jpg
Planning on a Sig Sauer Whiskey3 4-12x scope with the hellfire triplex reticle (undecided on mount) for this one as it will be used primarily for a hunting rifle. I've stocked up 300 rounds of factory Hornady ammo (Amax, Black & SST) for when i finally get scoped up so I can get zeroed and see what rifle likes what ammo. Well enough from me for now and I look forward to hearing any input or questions others have about what I've put together.
crappy pics added
(1st Grendel)
Lower:
CMT UHP15A receiver
CMT UHPR Mod2 15" handguard
BAD enhanced pivot & takedown pins
BAD enhanced bolt catch
BAD combat ambi safety selector
BAD extended magazine release
Geissele HSNM trigger
Larue APEG grip
JP silent captured recoil spring
Magpul PRS gen3 stock
Upper:
CMT UPUR1 receiver
Forward Control Design low drag forward assist
Strike Industries enhanced dust cover
AXTS Raptor charging handle
Sharps Rifle Co balanced bolt carrier NP3+
PF gas block & gas tube
PF 6.5 grendel bolt
PF 20" Criterion 6.5 grendel barrel (bull profile, bead blasted, rifle gas)
CMT 6.5.jpg
I just ordered an LMD muzzle brake (bead blasted to match the barrel) from PF last night. I am planning on a Larue LT745 QD 20moa mount,Vortex Viper PST gen2 5-25x scope and Atlas bipod to top it off.
PF Criterion 20in 6.5.jpgPF LMD 6.5.jpg
(2nd Grendel)
Lower:
Anderson AM15 receiver
DPMS LPK
Geissele SSAE trigger
BAD enhanced magazine release
Larue APEG grip
Strike Industries flat wire buffer spring (going to be playing with buffer weight as soon as the snow melts off my range, since I can't leave anything alone, works fine with standard carbine buffer though)
Magpul MOE SL stock
Upper:
Brownell's receiver
SLR Helix 13.7" handguard
CMMG forward assist
Colt dust cover
BCM Gunfighter mod4 charging handle
AIM nitrided bolt carrier
AA 6.5 grendel bolt
AA 16" Lightweight barrel
AA A2 flash hider
AA 16in 6.5.jpg
Planning on a Sig Sauer Whiskey3 4-12x scope with the hellfire triplex reticle (undecided on mount) for this one as it will be used primarily for a hunting rifle. I've stocked up 300 rounds of factory Hornady ammo (Amax, Black & SST) for when i finally get scoped up so I can get zeroed and see what rifle likes what ammo. Well enough from me for now and I look forward to hearing any input or questions others have about what I've put together.
crappy pics added
Comment