Tweet
im sure its been discussed, but search fails me
good brand gauges to buy?
do i need all 3?
good brand gauges to buy?
do i need all 3?
-
just some targets for printing
[url]https://drive.google.com/drive/folders/1E-OQ2svKTtp5DwVk-tSzpyUQSlmkO1xQ?usp=sharing[/url] -
Ideally the guages would be the from the same source as the reamer. For all around use, I use PTG guages, and you really only need a go and no-go. The field guage is not used at build time, and ig generally used in the military to determine if a rifle chamber is worn out. I doubt that you will shoot that many rounds through your rifle. -
thanksjust some targets for printing
[url]https://drive.google.com/drive/folders/1E-OQ2svKTtp5DwVk-tSzpyUQSlmkO1xQ?usp=sharing[/url]Comment
-
Just get a go gauge from Manson. He keeps them in stock. Put a piece of masking tape on rear of gauge and you then have a no go. Or buy both. Some folks just like the reassurance of the no go gauge
RichardMember since 2011, data lost in last hack attackComment
-
who is manson?just some targets for printing
[url]https://drive.google.com/drive/folders/1E-OQ2svKTtp5DwVk-tSzpyUQSlmkO1xQ?usp=sharing[/url]Comment
-
Originally posted by mdram View Post
Dave Manson makes the Grendel reamer most on here prefer to be used on their barrels
RichardMember since 2011, data lost in last hack attackComment
-
got it thanksjust some targets for printing
[url]https://drive.google.com/drive/folders/1E-OQ2svKTtp5DwVk-tSzpyUQSlmkO1xQ?usp=sharing[/url]Comment
Comment