- Magpul bev Block ~$50
- Grace roll pin punch set ~$30
- Grace standard punch set ~$30
- Roll pin starter punch set ~ $15
- 1/2 inch torque wrench ~$50
- torque bit driver ~$60
- armorers wrench (I like the Mapul ~$70)
- wheeler front pivot pin tool ~$7 (definitely worth it)
- a brass/Delrin hammer ~$10-$30 (depending on brand)
- Bench Block ~$30
- red and blue loctite
Not all of these are 100% necessary, but this is what I have to make the job easier. Also, handy to have tape around.
- Grace roll pin punch set ~$30
- Grace standard punch set ~$30
- Roll pin starter punch set ~ $15
- 1/2 inch torque wrench ~$50
- torque bit driver ~$60
- armorers wrench (I like the Mapul ~$70)
- wheeler front pivot pin tool ~$7 (definitely worth it)
- a brass/Delrin hammer ~$10-$30 (depending on brand)
- Bench Block ~$30
- red and blue loctite
Not all of these are 100% necessary, but this is what I have to make the job easier. Also, handy to have tape around.
Comment