Originally posted by Kohoki
View Post
My first 6.5mm Grendel Project - after 3 .223 Rem AR-15s
Collapse
X
-
Just received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/Last edited by Guest; 08-30-2013, 09:15 PM.
Comment
-
-
Originally posted by Kohoki View PostJoking aside, does anyone know what delivery times to expect at Alexander Arms?
I ordered a couple of hard use bolts as eventual back ups a month ago. While I was placing the order I kept hearing the old Smash mouth song Walking in on the Sun playing in head.
"So don't delay act now supplies are running out
Allow if you're still alive six to eight years to arrive
And if you follow there may be a tomorrow
But if the offer's shunned you might as well be walkin' on the sun""Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
Originally posted by Kohoki View PostJust received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/
They don't export into the U.S yet, but are looking into it.
Comment
-
-
Originally posted by Kohoki View PostJust received my Fail Zero Bolt Carrier today!!! It is awesome!!!
After a first inspection I wiped all the fingerprints away with a cloth and some isopropanol. After that I coated it with a special PTFE/Ceramic spray I got from Austria (http://www.guncoating.at/
Comment
-
-
Actually a third of a liter is more intuitive for me than 10 oz is. lol Plus, wow $26 is 20 euros....I had no idea they were that close nowadays. I would definitely pay $26 or even $35 with shipping but not so much with $100 plus shipping unless it worked as well as cerekote or something unbelievable.
Comment
-
-
Die and brass arrived today,...
The Hornady brass material is from excellent quality, there was no need to deburr the flash hole. The first load had the following data:
Case: Hornady
Primer: CCI450
Powder: IMR 4895 27 grs.
Bullet: Sierra MatchKing #1727 123 grs.
O.A.L. 57 mm
Today we continued with a medium Vithavuori N140 based load:
Case: Hornady
Primer: CCI450
Powder: VV N140 27 grs.
Bullet: LAPUA SCENAR 123 grs. GB489
O.A.L. 57 mm
Last edited by Guest; 09-10-2013, 09:21 PM.
Comment
-
-
This company will make the muzzlebrake:
Check them out: www.GUNWORKS.DE!!!!
Comment
-
Comment