The problem I am having is twofold! The gun jams with my reloads or factory ammunition. The cartridge case is pinned approximately half way up by the bolt face with the nose of the bullet nearly touching the feed ramp. This occurs at anytime whether the magazine has 10, 5 or 3 cartridges in the magazines.
I don't know if this normal or not, but the primer after discharge has flowed ( not permitting the cartridge case to stand firmly) this occurs after every shot factory or hand load. I have reduced the loading trying to stop this but it continues!
The firearm is a CORE 15, Hardcore system X3, 6.5 Grendel! It has been returned to the manufacture six (6) times. I have owned the rifle for two (2) months!
I don't know if this normal or not, but the primer after discharge has flowed ( not permitting the cartridge case to stand firmly) this occurs after every shot factory or hand load. I have reduced the loading trying to stop this but it continues!
The firearm is a CORE 15, Hardcore system X3, 6.5 Grendel! It has been returned to the manufacture six (6) times. I have owned the rifle for two (2) months!
Comment