I recently completed a build and am having feeding issues. My build consists of:
-BHW 1/8 Type 2 barrel
-Colt forged upper
-LBC complete bolt
-Rubber City Armory bolt carrier
-rifle length buffer tube with Wolff extra power spring (installed because initially my BCG would sometimes not go all the way back into battery)
-ASC 10 round mags (I've tried a few)
I don't have pics, but my issue (which happens about twice every 50 rounds) is that the round is stripped from the mag and on it's way in to the chamber and things stop with the round about halfway in to the chamber.
Any advice?
-BHW 1/8 Type 2 barrel
-Colt forged upper
-LBC complete bolt
-Rubber City Armory bolt carrier
-rifle length buffer tube with Wolff extra power spring (installed because initially my BCG would sometimes not go all the way back into battery)
-ASC 10 round mags (I've tried a few)
I don't have pics, but my issue (which happens about twice every 50 rounds) is that the round is stripped from the mag and on it's way in to the chamber and things stop with the round about halfway in to the chamber.
Any advice?
Comment