22 Grendel improved
Collapse
X
-
Originally posted by Westex View Postwill get chrono out and see ! just got a few loads worked up with reloader 15 and 16 . will post results
Replied to your email, Thanks for sending a copy of your reamer print.
My reamer has a shorter neck /shoulder blowed out .0263 further, .255 neck and a .135 free Bore.
As I mentioned in my thread , from what info I could find my reamer is basically a necked down 6mm Grinch.Last edited by Es 350; 06-30-2020, 02:16 AM.
Comment
-
-
Awesome, good #'s with the 80.5's.
I have been so busy with work no time for shooting or anything else! Has been pretty warm here too!
I have a 8 twist blank I need to get turned down, threaded and chambered for a Ruger Grendel action.
Plan to modify the mag , clearence the magwell to get an 88gr above neck / shoulder junction.... but that would make it have pretty long jump with any other bullet.
So may throat it for 80's and 88's be where they end up.
Comment
-
-
Originally posted by A.D.D. AR View PostSmokin Joe, I'm guessing he used the chamber reamer to then make the sizing die.
Unlikely - Spent cases would not touch the sides and the neck would not hold a bullet. Cartridges need to be tighter than the chamber, especially in gas guns. And the neck definitely needs to be squashed tighter than the bullet.
Comment
-
Comment