Any built a 6 Grendel?? Im kicking around the idea... i have a 6.5 grendel that shoots amazing... case capacity wise and given the performance of the 6.5 a necked down version to 6mm would probably kick ass... just guessing it would probably be about 300 fps faster given the smaller bore and smaller bullets... and i think iyd be a tack driver too.... what yall think?
6mm Grendel?
Collapse
X
-
-
Ask and ye shall receive...
Comment
-
-
Originally posted by ducks-and-bucks View PostAny built a 6 Grendel?? Im kicking around the idea... i have a 6.5 grendel that shoots amazing... case capacity wise and given the performance of the 6.5 a necked down version to 6mm would probably kick ass... just guessing it would probably be about 300 fps faster given the smaller bore and smaller bullets... and i think iyd be a tack driver too.... what yall think?
I have been shooting a 6mm AR for five or six years now in High Power. Size down the Grendel brass, load and shoot. H-4895 does the trick with a 95 or 107 Match King. Far superior at any distance to the 6.5 version. Downside is that you need to be more careful about loading or you will get into trouble with pressures and you will go through barrels much faster.
LR55
Comment
-
-
where do you find a good barrel chambered in this? I run a satern barrel in my 65 grendel, and that barrel is amazing! If I did it I wouldnt want a cheap quality barrel... I've been real happy with satern, but they are a long wait time out to get anything from them...
Comment
-
-
I'm gathering from his 6mmAR website that Robert Whitley only sells uppers, but maybe he has a lead on barrels, as well?:: 6.5 GRENDEL Deer and Targets :: 6mmARC Targets and Varmints and Deer :: 22 ARC Varmints and Targets
:: I Drank the Water :: Revelation 21:6 ::
Comment
-
-
Additional variations of 6mm cartridges based on the Grendel:
Drifter
Comment
-
-
We would be willing to make barrels. We would need at least 5 barrels to do a run.
We have in stock 6mm Barrel Blanks from Bartlein which we normally use for 243 Win in AR308 Platforms.
Price - the same as 6.5 Grendel.
Lead time would be dependent on Reamer Arrival."Precision - The Pinnacle of Perfection."
Comment
-
-
I have a couple of 6ARs.
One is a special "tight chamber" for Lapua Grendel brass only. The other runs any Grendel Brass. I personally own both reamers.
Working on load development for the tight chamber gun now. Very pleased with the velocity and accuracy so far. Shows alot of potential for fast MV.
I can re-size the Grendel brass necks in one shot, using a special 6AR Redding die. No fire forming or other special tools needed.
Very pleasant to shoot also. Targets are both shot 105 grain class bullets, Amax and Scenar.Attached FilesLast edited by SG4247; 08-05-2015, 11:43 PM.NRA F-Class Mid Range High Master
Comment
-
Comment