I have been looking for a single-shot sled for the Howa Mini for quite a while and finally found one. I bought this off of Ebay. I know I hate buying anything off there but this sled is cheap and it works and it is the only one that I have been able to find. The quality is top notch. It is 3D printed by some fella in Michigan. I have tried feeding 2.260", 2.290", 2.300" OALs and they all feed smoothly. This is in my MDT chassis but the maker says that he developed the sled using a stock Howa Mini with factory stock. Anyway here is the link which also has pictures of the sled.
Works for multiple calibers in the Howa Mini. Here is a description from the Ebay page:
Works for multiple calibers in the Howa Mini. Here is a description from the Ebay page:
Insertable Single shot conversion that uses no tooling. Converts your Howa Mini 1500 to a single shot, and can return right back to using the magazine with a simple swap. Has a feed ramp to help aid with chambering the round. Excellent option for those that don't need follow up shots, bench shooting, working on your loads, and those with arthritic hands that have a hard time loading the standard magazines.
Designed and made in house with PLA in America using American materials.
Used a 6.5 Grendel rifle for pattern, and confirmed with the magazine dimensions for the following calibers:
7.62x39
6.5 Grendel
.223/5.56
204 Ruger
222 Rem
300 AAC Blackout
350 Legend
Designed and made in house with PLA in America using American materials.
Used a 6.5 Grendel rifle for pattern, and confirmed with the magazine dimensions for the following calibers:
7.62x39
6.5 Grendel
.223/5.56
204 Ruger
222 Rem
300 AAC Blackout
350 Legend