If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
New to the forum but I have several Ballistic Advantage 6.5 Grendel bolts. I bought the complete BCGs because of the carriers needed for other calibers. OP, if you still need a bolt, I will ship one for $75 with payment via PayPal (goods and services, so you are protected). Bolt details below...
Pulled from a complete new, never fired, 6.5 Grendel Ballistic Advantage Nitride Bolt Carrier Group. This Type 2 BA marked bolt is assembled, as it came from the factory but does not include the bolt cam pin, firing pin, or firing pin retaining pin.
- 6.5 Grendel Bolt machined from case hardened 9310 Steel
- Type 2 Bolt Face (.136)
- 4340 Steel Extractor
- Mil-Spec Extractor Spring and O-Ring
- Shot Peened, HPT/MPI
- Nitride
- Test Fired complete before shipping to ensure proper function
Complete 6.5 Grendel Bolt.Features a 9310 steel bolt, heat treated, hard turned and shot-peened for increased surface strength and durability, and an extractor booster to ensure reliable cycling during rapid semi-auto or full-auto fire. Parts are magnetic particle inspection tested in batches to ensure
New to the forum but I have several Ballistic Advantage 6.5 Grendel bolts. I bought the complete BCGs because of the carriers needed for other calibers. OP, if you still need a bolt, I will ship one for $75 with payment via PayPal (goods and services, so you are protected). Bolt details below...
Pulled from a complete new, never fired, 6.5 Grendel Ballistic Advantage Nitride Bolt Carrier Group. This Type 2 BA marked bolt is assembled, as it came from the factory but does not include the bolt cam pin, firing pin, or firing pin retaining pin.
- 6.5 Grendel Bolt machined from case hardened 9310 Steel
- Type 2 Bolt Face (.136)
- 4340 Steel Extractor
- Mil-Spec Extractor Spring and O-Ring
- Shot Peened, HPT/MPI
- Nitride
- Test Fired complete before shipping to ensure proper function
$75 shipped, payment via PayPal. Again, just the assembled bolt, as circled in red in the picture below.
[ATTACH=CONFIG]17721[/ATTACH]
Great post, plenty of details.
If I needed a bolt I'd be all over this.
Comment