WTB Nosler 129 ABLR

[fn16ga]

WTB Nosler 6.5mm 129gr ABLR , Been looking for these for awhile . Out of stock everywhere I've checked .

PM me If you have some you will sell or know where I can purchase some, please let me know .

Thanks , Mark

[fn16ga]

Still looking

Thanks.

[dpete]

Are you watching Shooter's Pro Shop website or on their "alert me" list for them? Yes the bullets are cosmetic blems but they still shoot damm well.

[fn16ga]

I have checked them before , still out of stock . Thanks .

[fn16ga]

grendelnubi , I sent you a pm

[Toney198]

I just received mine (scheels) online order. Also been harassing Nosler monthly, they just came off the presses within the last week! Now does anyone have a starting point for a load? I am only trying these because the eldm did not penetrate very well (exploded) dead dear but no blood to track and sst (factory) did not group well.

[kmon]

I just received mine (scheels) online order. Also been harassing Nosler monthly, they just came off the presses within the last week! Now does anyone have a starting point for a load? I am only trying these because the eldm did not penetrate very well (exploded) dead dear but no blood to track and sst (factory) did not group well.

A load that has worked for at least 2 of us is 30.3 or 30.6 gr CFE223 seated at 2.265 oal. Start at 29.5 and work up for your rifle

i think with a search you can find A5Blaster using H4895 with this bullet.

[Toney198]

Thank you! I am so ready to try this.

[grendelnubi]

Another good load is 26.9 ARComp seated at 2.265.

[Huckleberry75]

A load that has worked for at least 2 of us is 30.3 or 30.6 gr CFE223 seated at 2.265 oal. Start at 29.5 and work up for your rifle

i think with a search you can find A5Blaster using H4895 with this bullet.

I need to go find that recipe. Have 16# of h4895

[kmon]

Info he posted with some workup and ladder tests

https://www.65grendel.com/forum/showthread.php?21333

[lazyengineer]

Another good load is 26.9 ARComp seated at 2.265.

That fits in the magazine?

[kmon]

2.265 works in my AR mags and can go 2.285 in the CZ. I run steel mags for that reason in the AR and it works out to 2.28 with very little feed problems and no problems at 2.265.

[Scout175]

hey fn16ga, just found some at: https://www.bluecollarreloading.com/...accubond-58943

good luck, Scout

[fn16ga]

Thank you for the heads up , I have all I need for now, hoping to get some loaded up and shoot this weekend .