NFA Disclaimer
Once a sub 16" barrel is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA), unless assembled into an AR Pistol. Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
Barrel Count
Claimed: 11
Goal: 30 - Need: 20
Deposits: 0
Paid For: 0
Barrel Length Score
12.5" - 8
11.5" - 7
10.5" - 2
I've asked for your first and second choice of barrel lengths in the spread sheets. I've using a weighted scoring system to determine the winner, possibly 2 winners. Each first choice is 3 points and each second choice is 2 points.
I'm starting a new thread so I can specify the poll a little more. It seems everyone interested in these barrels are interested in getting it black nitrated. I'll still be working to make that happen, but no longer see a need to have it in the poll.
I'll consider each vote a serious potential buyer. If you don't intend to buy a barrel, please don't vote.
I've got the itch for an 11.5" Grendel Black nitrated barrel. PDW/Truck/Tree Stand Gun. However, I'm open to a 10.5" & 12.5" too.
Right now we're looking at either a Lilja M4 contour barrel, which has a carbine length gas system, cut down to 12.5", 11.5" or 10.5" or a scaled down version of the Lilja AR740 contour barrel, with a carbine length gas system, cut down to 12.5", 11.5" or 10.5".
Lilja requires a minimum order of 20 barrels to do this. Obviously I can't make this purchase on my own.
Lilja will have Manson Reamers in the near future and the use of SAAMI Spec Grendel Manson reamers will be a requirement for this purchase.
There's a discount for 5+ barrels and an additional discount for ordering sub 15" barrels. Dan Lilja is ready to quote me a final price once we get him a number of barrels being ordered.
Expect no more expensive than $425 per barrel, and fluting $115 per barrel.
Black Nitrating: It seems everyone is as interested in this service as I am. I'll update the following post with information on this at a later time.
Interested in opinions from anyone with sub 14" Grendels.
SPECS:
Bolt used for Head Spacing - Maxim Firearms 6.5 Grendel Bolt 0.135" recess
Fluted - Optional
Contour - M4 cut to length
Length - TBD
Gas System - Carbine Length
Twist - 7" (subject to change)
Thread - 5/8X24
Timeline:
It's a little early, but I thought it a good ideal to state my goal.
At this time I intend to start collecting deposits by August 1st and would like to be sending the deposit to Lilja by August 15th.
Once details pan out in the next week or so I'll post the order form.
If you're interested in this group buy, please download the sheet, fill out the excel sheet at the link and email it to me at me.cory.m.clark@gmail.com (The email is correct, please copy and paste)
Once a sub 16" barrel is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA), unless assembled into an AR Pistol. Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
Barrel Count
Claimed: 11
Goal: 30 - Need: 20
Deposits: 0
Paid For: 0
Barrel Length Score
12.5" - 8
11.5" - 7
10.5" - 2
I've asked for your first and second choice of barrel lengths in the spread sheets. I've using a weighted scoring system to determine the winner, possibly 2 winners. Each first choice is 3 points and each second choice is 2 points.
I'm starting a new thread so I can specify the poll a little more. It seems everyone interested in these barrels are interested in getting it black nitrated. I'll still be working to make that happen, but no longer see a need to have it in the poll.
I'll consider each vote a serious potential buyer. If you don't intend to buy a barrel, please don't vote.
I've got the itch for an 11.5" Grendel Black nitrated barrel. PDW/Truck/Tree Stand Gun. However, I'm open to a 10.5" & 12.5" too.
Right now we're looking at either a Lilja M4 contour barrel, which has a carbine length gas system, cut down to 12.5", 11.5" or 10.5" or a scaled down version of the Lilja AR740 contour barrel, with a carbine length gas system, cut down to 12.5", 11.5" or 10.5".
Lilja requires a minimum order of 20 barrels to do this. Obviously I can't make this purchase on my own.
Lilja will have Manson Reamers in the near future and the use of SAAMI Spec Grendel Manson reamers will be a requirement for this purchase.
There's a discount for 5+ barrels and an additional discount for ordering sub 15" barrels. Dan Lilja is ready to quote me a final price once we get him a number of barrels being ordered.
Expect no more expensive than $425 per barrel, and fluting $115 per barrel.
Black Nitrating: It seems everyone is as interested in this service as I am. I'll update the following post with information on this at a later time.
Interested in opinions from anyone with sub 14" Grendels.
SPECS:
Bolt used for Head Spacing - Maxim Firearms 6.5 Grendel Bolt 0.135" recess
Fluted - Optional
Contour - M4 cut to length
Length - TBD
Gas System - Carbine Length
Twist - 7" (subject to change)
Thread - 5/8X24
Timeline:
It's a little early, but I thought it a good ideal to state my goal.
At this time I intend to start collecting deposits by August 1st and would like to be sending the deposit to Lilja by August 15th.
Once details pan out in the next week or so I'll post the order form.
If you're interested in this group buy, please download the sheet, fill out the excel sheet at the link and email it to me at me.cory.m.clark@gmail.com (The email is correct, please copy and paste)
Comment