NFA Disclaimer
Once a sub 16" barrel is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA), unless assembled into an AR Pistol. Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
If you are interested in placing an order email me at me.cory.m.clark@gmail.com . Expect a reply from me with the order form and deposit agreement attached, within 48 hours.
Barrel Count
Ordered: 19
Goal: 30 - Need: 20
Deposits: 12
Paid For: 0
Barrel Length Score
12.5" - 27
11.5" - 19
10.5" - 2
Prices
$325 per Barrel
$75 Fluting
$20 per Muzzle Cap
I've asked for your first and second choice of barrel lengths in the Order Forms. I've using a weighted scoring system to determine the winner, possibly 2 winners. Each first choice is 3 points and each second choice is 2 points.
The minimum order is 20 barrels. If we can get an order of 25 barrels and at least 10 for a second length, there will be 2 barrel length options in this order.
I've got the itch for an 11.5" Grendel Black nitrated barrel. PDW/Truck/Tree Stand Gun. However, I'm open to a 10.5" & 12.5" too.
Lilja requires a minimum order of 20 barrels to do this. Obviously I can't make this purchase on my own.
Lilja will have Manson Reamers in the near future and the use of SAAMI Spec Grendel Manson reamers will be a requirement for this purchase.
There's a discount for 5+ barrels and an additional discount for ordering sub 15" barrels. Dan Lilja is ready to quote me a final price once we get him a number of barrels being ordered.
Expect no more expensive than $425 per barrel, and fluting $115 per barrel.
Interested in opinions from anyone with sub 14" Grendels.
SPECS:
Bolt used for Head Spacing - Maxim Firearms 6.5 Grendel Bolt 0.135" recess
Fluted - Optional
Contour - modified AR740 cut to length
Length - TBD (12.5", 11.5", or 10.5")
Gas System - Carbine Length
Twist - 8" (subject to change to a 7.5")
Thread - 5/8X24
Timeline:
See post #2.
Once a sub 16" barrel is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA), unless assembled into an AR Pistol. Please check with your local and state municipalities for any further regulatory requirements. It is the buyer’s responsibility to make sure they comply with all NFA rules and applicable laws.
If you are interested in placing an order email me at me.cory.m.clark@gmail.com . Expect a reply from me with the order form and deposit agreement attached, within 48 hours.
Barrel Count
Ordered: 19
Goal: 30 - Need: 20
Deposits: 12
Paid For: 0
Barrel Length Score
12.5" - 27
11.5" - 19
10.5" - 2
Prices
$325 per Barrel
$75 Fluting
$20 per Muzzle Cap
I've asked for your first and second choice of barrel lengths in the Order Forms. I've using a weighted scoring system to determine the winner, possibly 2 winners. Each first choice is 3 points and each second choice is 2 points.
The minimum order is 20 barrels. If we can get an order of 25 barrels and at least 10 for a second length, there will be 2 barrel length options in this order.
I've got the itch for an 11.5" Grendel Black nitrated barrel. PDW/Truck/Tree Stand Gun. However, I'm open to a 10.5" & 12.5" too.
Lilja requires a minimum order of 20 barrels to do this. Obviously I can't make this purchase on my own.
Lilja will have Manson Reamers in the near future and the use of SAAMI Spec Grendel Manson reamers will be a requirement for this purchase.
There's a discount for 5+ barrels and an additional discount for ordering sub 15" barrels. Dan Lilja is ready to quote me a final price once we get him a number of barrels being ordered.
Expect no more expensive than $425 per barrel, and fluting $115 per barrel.
Interested in opinions from anyone with sub 14" Grendels.
SPECS:
Bolt used for Head Spacing - Maxim Firearms 6.5 Grendel Bolt 0.135" recess
Fluted - Optional
Contour - modified AR740 cut to length
Length - TBD (12.5", 11.5", or 10.5")
Gas System - Carbine Length
Twist - 8" (subject to change to a 7.5")
Thread - 5/8X24
Timeline:
See post #2.
Comment