If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Nice!
I got a 24” Barlien custom bull barrel from Paul Craddock.I paid $525 delivered.Took 6 weeks.Worth the time and every penny I paid.I got similar results out the box!
Now I am thinking about having Mark @ PF build me the 24” Krieger bull barrel I really wanted!
maximus 83, never fired a factory load through this upper.
107 gr sierra TMK, 29gr 8208, CCI #41, and Hornady brass. 2750ish FPS, 3/4" avg groups.
Working on a 130 grain ELD load. Love the 123 grain load but erratic accuracy at 1000 yds(400' elevation). 130s seem to still be sonic so far at 100 degrees.
130 gr ELD, 27gr 8208, CCI#41, Hornady brass. 2450 FPS estimated. Maybe slightly better than 3/4" groups.
" " " 26.7 gr AR Comp, " , ", 2450FPS estimated. Once again around 3/4" groups.
Still experimenting with the 130s. No chrono at this time.
Think I will try 26.7gr 8208 again. Only fired 10 rounds at this weight. Not enough for me to determine the loads potential.
Don't think ill go over 27gr until I get my chrony back online.
AR Comp also promising. Think ill load up some more at 26.7gr. Starting to get quite compressed, don't think ill go any higher with it either until chronys up and running.
Comment