Howa Mini-Action Torque
|
Howa Mini-Action Torque
|
03-12-2017, 04:09 AM
Ok fair enough - I've torqued mine tight - around 45inch lbs with the wheeler fat wrench and it seems ok. I do my tikkas at 35in-lbs in the factory tupperware... I've gone to 50 on the tikkas and crushed the stock but the plastic bottom metal was fine... ended up replacing it with a manners
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Howa Mini-Action Torque - by ripcord - 02-28-2017, 05:46 AM
Howa Mini-Action Torque - by Matt @ LSI - 02-28-2017, 10:44 PM
Howa Mini-Action Torque - by VASCAR2 - 03-01-2017, 03:49 AM
Howa Mini-Action Torque - by ripcord - 03-01-2017, 04:07 AM
Howa Mini-Action Torque - by Rebels010 - 03-01-2017, 04:13 AM
Howa Mini-Action Torque - by Matt @ LSI - 03-01-2017, 02:42 PM
Howa Mini-Action Torque - by Barb Bush - 03-01-2017, 06:58 PM
Howa Mini-Action Torque - by Sputnik - 03-01-2017, 07:30 PM
Howa Mini-Action Torque - by Rebels010 - 03-01-2017, 08:31 PM
Howa Mini-Action Torque - by ripcord - 03-01-2017, 08:43 PM
Howa Mini-Action Torque - by Matt @ LSI - 03-01-2017, 08:59 PM
Howa Mini-Action Torque - by FW Conch - 03-08-2017, 10:38 AM
Howa Mini-Action Torque - by Matt @ LSI - 03-08-2017, 02:10 PM
Howa Mini-Action Torque - by LRRPF52 - 03-08-2017, 04:32 PM
Howa Mini-Action Torque - by FW Conch - 03-09-2017, 10:18 AM
Howa Mini-Action Torque - by nuthead - 03-10-2017, 06:01 AM
Howa Mini-Action Torque - by LRRPF52 - 03-10-2017, 06:10 PM
Howa Mini-Action Torque - by nuthead - 03-12-2017, 04:09 AM
Howa Mini-Action Torque - by northdude - 04-26-2021, 09:04 AM
|
