6.5 Grendel CAD - FEA
|
6.5 Grendel CAD - FEA
|
02-28-2013, 12:06 AM
The belted magnum I was referring to is when the case head expands due to the case being partially extracted before the pressure drops. You can see pictures here.
http://www.65grendel.com/forum/showthrea...erpressure |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
6.5 Grendel CAD - FEA - by cory - 02-27-2013, 03:07 AM
6.5 Grendel CAD - FEA - by LRRPF52 - 02-27-2013, 03:14 AM
6.5 Grendel CAD - FEA - by dmsims21 - 02-27-2013, 03:46 AM
6.5 Grendel CAD - FEA - by cory - 02-27-2013, 06:25 AM
6.5 Grendel CAD - FEA - by JASmith - 02-27-2013, 03:25 PM
6.5 Grendel CAD - FEA - by Trooper - 02-27-2013, 05:20 PM
6.5 Grendel CAD - FEA - by cory - 02-27-2013, 05:43 PM
6.5 Grendel CAD - FEA - by cory - 02-27-2013, 09:33 PM
6.5 Grendel CAD - FEA - by dmsims21 - 02-28-2013, 12:06 AM
6.5 Grendel CAD - FEA - by Variable - 02-28-2013, 12:52 AM
6.5 Grendel CAD - FEA - by Nukes - 02-28-2013, 01:29 AM
6.5 Grendel CAD - FEA - by JASmith - 02-28-2013, 04:07 AM
6.5 Grendel CAD - FEA - by Bill Alexander - 02-28-2013, 12:27 PM
6.5 Grendel CAD - FEA - by Nukes - 02-28-2013, 02:29 PM
6.5 Grendel CAD - FEA - by Trooper - 02-28-2013, 02:40 PM
6.5 Grendel CAD - FEA - by Trooper - 02-28-2013, 02:42 PM
6.5 Grendel CAD - FEA - by JASmith - 02-28-2013, 03:04 PM
6.5 Grendel CAD - FEA - by Nukes - 02-28-2013, 03:10 PM
6.5 Grendel CAD - FEA - by Trooper - 02-28-2013, 04:45 PM
6.5 Grendel CAD - FEA - by LRRPF52 - 02-28-2013, 05:26 PM
6.5 Grendel CAD - FEA - by cory - 04-28-2013, 10:22 PM
6.5 Grendel CAD - FEA - by cory - 04-29-2013, 01:18 AM
|
