The load data is below.
Load data was generated using Quick Load a 24 inch barrel a COAL (cartridge over all length) of 2.200 inches and your COAL and velocity could be a little different.
AS WITH ALL RELOADING APPROACH THE MAXIMUM LOADS WITH CAUTION AS ALL RIFLES AND RELOADING TECHNIQUES WILL BE DIFFERENT. If YOU CHANGE ANY OF YOUR COMPONENTS; THIS INCLUDES DIFFERENT POWDER LOT NUMBERS; YOU MUST REFIGURE YOUR LOADS BY STARTING WITH THE MINIMUM LOAD.
If we can be of any additional help feel free to contact us.
Thanks for your interest and have a great day.
Walt Berger
Berger Bullets
Technical Advisor
6.5 GRENDEL
Bullet Powder Start Load Approximate Start Velocity Max Load Approximate Max Velocity Max Load Density
140 Grain VIHT N130 20.0 2076 21.9 2227 95.0%
140 Grain WW 748 22.5 2112 25.2 2348 95.0%
140 Grain IMR 4198 18.0 2050 20.1 2220 90.9%
140 Grain H322 20.5 2107 22.8 2305 95.2%
140 Grain BENCHMARK 21.0 2072 23.2 2258 95.5%
140 Grain RAMSHOT TAC 22.0 2083 24.4 2290 92.4%
140 Grain RE 10X 19.5 2104 21.5 2270 92.4%
140 Grain VARGET 22.0 2037 24.6 2264 103.1%
6.5 GRENDEL
Bullet Powder Start Load Approximate Start Velocity Max Load Approximate Max Velocity Fill Ratio
130 Grain VIHT N130 20.0 2109 22.5 2316 95.9%
130 Grain WW 748 23.0 2172 25.7 2415 95.2%
130 Grain IMR 4198 18.5 2131 20.7 2315 92.0%
130 Grain H322 21.0 2177 23.5 2400 96.5%
130 Grain BENCHMARK 21.5 2139 23.9 2348 96.8%
130 Grain RAMSHOT TAC 22.5 2144 25.0 2366 93.1%
130 Grain VARGET 22.5 2095 25.2 2337 103.8%
130 Grain RE-10X 20.0 2181 22.1 2361 93.4%
130 Grain BL-C(2) 23.5 2135 26.3 2394 98.2%
I am awaiting a response from them as to whether or not they have a velocity threshold for terminal performance.
Load data was generated using Quick Load a 24 inch barrel a COAL (cartridge over all length) of 2.200 inches and your COAL and velocity could be a little different.
AS WITH ALL RELOADING APPROACH THE MAXIMUM LOADS WITH CAUTION AS ALL RIFLES AND RELOADING TECHNIQUES WILL BE DIFFERENT. If YOU CHANGE ANY OF YOUR COMPONENTS; THIS INCLUDES DIFFERENT POWDER LOT NUMBERS; YOU MUST REFIGURE YOUR LOADS BY STARTING WITH THE MINIMUM LOAD.
If we can be of any additional help feel free to contact us.
Thanks for your interest and have a great day.
Walt Berger
Berger Bullets
Technical Advisor
6.5 GRENDEL
Bullet Powder Start Load Approximate Start Velocity Max Load Approximate Max Velocity Max Load Density
140 Grain VIHT N130 20.0 2076 21.9 2227 95.0%
140 Grain WW 748 22.5 2112 25.2 2348 95.0%
140 Grain IMR 4198 18.0 2050 20.1 2220 90.9%
140 Grain H322 20.5 2107 22.8 2305 95.2%
140 Grain BENCHMARK 21.0 2072 23.2 2258 95.5%
140 Grain RAMSHOT TAC 22.0 2083 24.4 2290 92.4%
140 Grain RE 10X 19.5 2104 21.5 2270 92.4%
140 Grain VARGET 22.0 2037 24.6 2264 103.1%
6.5 GRENDEL
Bullet Powder Start Load Approximate Start Velocity Max Load Approximate Max Velocity Fill Ratio
130 Grain VIHT N130 20.0 2109 22.5 2316 95.9%
130 Grain WW 748 23.0 2172 25.7 2415 95.2%
130 Grain IMR 4198 18.5 2131 20.7 2315 92.0%
130 Grain H322 21.0 2177 23.5 2400 96.5%
130 Grain BENCHMARK 21.5 2139 23.9 2348 96.8%
130 Grain RAMSHOT TAC 22.5 2144 25.0 2366 93.1%
130 Grain VARGET 22.5 2095 25.2 2337 103.8%
130 Grain RE-10X 20.0 2181 22.1 2361 93.4%
130 Grain BL-C(2) 23.5 2135 26.3 2394 98.2%
I am awaiting a response from them as to whether or not they have a velocity threshold for terminal performance.
Comment