Originally posted by blackholegun
View Post
2018 6.5 Grendel Deals
Collapse
This topic is closed.
X
X
-
If you missed out on the Maxim PDW brace offer, this might work.
Through tomorrow, the coupon code PUNT saves another 10% and puts the cost at $315 with free shipping. This is the brace only, not the bundle.
Comment
-
-
Originally posted by blackholegun View PostWill have to see how this pans out, if so it will be a good deal on a charging handle.
http://ljsarparts.com/LJs-T-Rex-ambi...yle_p_686.html
Why is this one $5 cheaper?
Comment
-
-
Originally posted by bj139 View PostI bought a bunch of those at Delta Team Tactical for about the same price. It almost mimics a dual side charger. It is very robust.
Why is this one $5 cheaper?
http://ljsarparts.com/LJs-T-Rex-ambi...le-_p_796.html
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
Comment
-
-
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.Engineer, FFL and Pastor
Comment
-
-
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.
Damn. Thats something I could afford too. Oh well...
Comment
-
-
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing
- Kirk -
Comment
-
-
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.
7075 with Type III hard coat anodizing. These should work.
Comment
-
-
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.
I would be surprised if they are not anodized in some fashion as that would be the cost effective way of doing things.
I ordered one and will see how it works out.
I will be glad to report back.
I will say that 90.00 bucks for a charging handle is a little nuts thoughEverything I enjoy doing is either illegal, immoral or, just to damn expensive
Comment
-
-
Larue MBT triggers on sale again for $99 starting today. Just got the e-mail.
NRA Endowment Member, GOA Life Member, FPC Member, VDL Member
Comment
-
-
Originally posted by VASCAR2 View PostIt would be an interesting survey to see how many 6.5 Grendels each member owns.Originally posted by Frontier Gear View PostDoes that include ones in progress?
Originally posted by LRRPF52 View PostNotice how they don't call out the alloy used.
A charge handle should be 7075 T6 with a Type III hard coat anodizing, not "the finest aerospace grade aluminum with a blackened finish".
If these are 6061, they will fail early. Makes you wonder where it was made based on that price, and what materials, QC standards, etc.
Its been interesting ordering parts six at a time and seeing what kind of batch quality you get on certian items..
While im on here.. Gearheadworks released their latest batch of tail hook mod 2's last night. I got my order in. $200 +$7 S&H.
https://www.gearheadworks.com/index....025bb2aba46ff1tailhook_bravo.jpg
tailhook_bravo_05.jpg
And yes LOP is adjustable.. $200tax stamp or $200 for a brace. Challenge accepted!!!
They also offer discounts for LEO, retired /active service, and first responders which is nice.Last edited by The Profit Joseph Sith; 02-07-2018, 05:22 AM.
Comment
-
Comment