Not sure to worry or not about Extractor

[mdram]

Thanks Klem. Will check when I get home.

And I do think the longitudinal scratch is from the magazine, as it is brand new and rounds sit in there very tightly.

actually we taled about factory and reloads
when i asked for the load data, you never did give it.
sorry for the confusion about the velocity

[BVickery1974]

actually we taled about factory and reloads
when i asked for the load data, you never did give it.
sorry for the confusion about the velocity

No worry.

My ELDs are Factory pushing a tad slower out of 24" barrel. I am thinking same thing but waiting for confirmation.

If I was 400 fps over what I should be, I do think primers would be affected. Showed friend and he had exact same issue with his build, put an H2 in it was gtg. Will do that at the range and recheck the adj. Gas block

[bfilbey]

I'm just going to be the simpleton here but have you beveled the ejector? That simple task has reduced or eliminated a great portion of my case marking.

I realize I am a bit late to the party, if this has all been covered please forgive me.