Originally posted by BjornF16
View Post
Desert Tactical Arms
Collapse
X
-
I today sent the following letter-input to Desert Tech President & CEO, Nick Young:
"Dear Mr. Young:
"First, I'll take this opportunity to applaud your recent decision re the Pakistan arms deal. My hat off to you for taking the high road.
"It was with great anticipation that I looked forward to the unveiling of the new Desert Tech Micro Dynamic Rifle (MDR). And, I shared with others the hope --- I dare state, the expectation --- that the highly inticing statement, "Convertible between 5 calibers," meant to include the 21st Century ultra-efficient, can-do 6.5mm Grendel cartridge.
"I've been working with Bullpup rifles, since the 1970's. I think it's fair to state that the term, "Micro Dynamic Rifle," represents the essence of a compact, easy-to-carry, all-purpose Bullpup rifle. Enter: the "Micro Dynamic Cartridge," the 6.5mm Grendel.
"Using 16" barrels, I've compared the downrange Velocity (fps) and Energy (ft-lbs) values for the 6.5mm Grendel (123-grain, BC - 0.510), the 6.8mm SPC (110-grain, BC - 0.370) and the .308 Winchester (150-grain, BC - 0.314), to 600 yards (Drift, with 10 mph crosswind):
. . . 6.5mm Grendel . . . . . . 6.8mm SPC . . . . . . . . .308 Winchester
. . . Velocity/Energy . . . . . Velocity/Energy . . . . . Velocity/Energy
0 ---- 2460/1653 . . . . . . . . . . . 2550/1588 . . . . . . . . . . 2575/2208
100 - 2297/1441 . . . . . . . . . . . 2322/1317 . . . . . . . . . . . 2306/1771
200 - 2140/1250 . . . . . . . . . . . 2106/1083 . . . . . . . . . . 2054/1405
300 - 1989/1081 . . . . . . . . . . . 1902/884 . . . . . . . . . . . 1819/1102
400 - 1845/930 . . . . . . . . . . . . 1711/715 . . . . . . . . . . . . 1603/856
500 - 1709/797 . . . . . . . . . . . . 1537/577 . . . . . . . . . . . . 1411/664
600 - 1580/682 (D, 32.3") . . 1380/465 (D, 45.9") . . 1249/520 (D, 56.2")
"NOTE: While the 6.5mm Grendel shares the same basic case, as the 7.62x39mm round, the Grendel's case taper is less, and doesn't require the "banana-shaped" magazine.
"On behalf of MDR Enthusiasts, who want an all-purpose cartridge, with half the recoil energy of the .308 Winchester round, your consideration is appreciated. Thank you.
"Sincerely,"
Comment
-
-
A bunch of us should write similar letters as well.
As much as I would love a DT weapon in either the bolt action or MDR, I'll probably never be able to get one unless I unload some other guns which isn't likely for some time. So having them make a Grendel version won't effect me at all.
However, it will affect us if we push and begin seeing big name manufacturers building a 6.5 Grendel rifle and bring more attention to the round and it's capabilities. Once somebody does just a little bit digging like I did last year they will see the capabilities and instantly love the round. Especially if you are wanting to start doing some distance shooting. The same AR-15 platform can be used. This is very appealing.
But the more gun makers putting a 6.5 Grendel weapon on the market the better it is for all of us.
Comment
-
-
I'm excited to see the Grendel offered in the MDR. It looks like this could be the answer to the need for an AR12 for the Grendel. That is if they utilize the .308 components for the Grendel.Last edited by cory; 01-16-2014, 02:14 PM."Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
Just got back from SHOT, and spent some time at DTA's booth looking over the prototypes of the MDR-C and MDR. If it proves reliable, I think they have cracked the bullpup code. This is something I've had to sit on for years, knowing that Nick was working on a semi-auto bullpup. He's a big bullpup fan obviously, and has really analyzed all the military bullpup variants on the market over the years.
The guns are very light compared to the Tavor. The ejection system is one of the more innovative approaches to a bullpup design that I have seen over the years. The trigger feels nothing like a bullpup, and is very smooth and light on the prototypes. The system has a common receiver set with the upper and lower, with a modular insert to change cartridge length types when going from 7.62 NATO based cartridge, to intermediate cartridges.
The bolt is a Stoner rotating lug design, but with nuances to be able to articulate with the ejection system. The ejection port cover/chute can be opened by the user to access the chamber and bolt for clearing malfs. You can check the chamber without opening the cover, as there is a bit of clearance on the forward edge of the cover to see the chamber.
The gas block and regulator is reminiscent of the FAL, with tool-less rotation of the knob. The magazine release is forward of the trigger guard, and mirror-ambidextrous, so it is the only bullpup I know of that can drop the mag with in-place firing hand operation. The guns have a lot of TD&E to undergo, so I wouldn't expect anything soon on them.
Comment
-
-
Great info. I don't have any experience with bullpup, but I believe some use electrical systems in their triggers, correct? Is the MDR a purely mechanical system or does it rely on some electrical systems in the trigger and mag release?"Those who sacrifice liberty for security, deserve neither." Benjamin Franklin
Comment
-
-
Totally mechanical. Neither I, nor a prominent gun industry reviewer could get the trigger to reset, so that is one of the areas that needs to be addressed between now and production. Maybe it resets when fired, but we had no way to tell.
The Remington R51 pistols I looked over had the same problem. The slide would hang up when you held the trigger to the rear while testing reset.
Comment
-
-
Originally posted by LRRPF52 View PostJust got back from SHOT, and spent some time at DTA's booth looking over the prototypes of the MDR-C and MDR. If it proves reliable, I think they have cracked the bullpup code. This is something I've had to sit on for years, knowing that Nick was working on a semi-auto bullpup. He's a big bullpup fan obviously, and has really analyzed all the military bullpup variants on the market over the years.
The guns are very light compared to the Tavor. The ejection system is one of the more innovative approaches to a bullpup design that I have seen over the years. The trigger feels nothing like a bullpup, and is very smooth and light on the prototypes. The system has a common receiver set with the upper and lower, with a modular insert to change cartridge length types when going from 7.62 NATO based cartridge, to intermediate cartridges.
The bolt is a Stoner rotating lug design, but with nuances to be able to articulate with the ejection system. The ejection port cover/chute can be opened by the user to access the chamber and bolt for clearing malfs. You can check the chamber without opening the cover, as there is a bit of clearance on the forward edge of the cover to see the chamber.
The gas block and regulator is reminiscent of the FAL, with tool-less rotation of the knob. The magazine release is forward of the trigger guard, and mirror-ambidextrous, so it is the only bullpup I know of that can drop the mag with in-place firing hand operation. The guns have a lot of TD&E to undergo, so I wouldn't expect anything soon on them.
The Tavor is the most modern bullpup by age but the design did not break any new ground to make it any better than an
AUG or FS2000. Lighter is always better and being able to drop the mag with the firing hand still in position is a nice feature.
Can you say how the ejection system works, as compared to the operation of the FS2000? The forward ejection really improves the ambi operation of the system, one of the things that makes the FS2000 so good.
I will be watching the development, especially if they make a Grendel barrel or I would like one in 7.62x39, if no Grendel.
Comment
-
-
-
-
Originally posted by LRRPF52 View PostJust got back from SHOT, and spent some time at DTA's booth looking over the prototypes of the MDR-C and MDR. If it proves reliable, I think they have cracked the bullpup code.
Comment
-
-
Comment