lol, i like that you ' ' around 'fixed' haha, i stand corrected, cz apparently tweaked the control round feed and made it some sort of hybrid single feed away homies
looking for a 6.5gr bolt gun
Collapse
X
-
I have a CZ American and a CZ MTR........for hunting the MTR might be a bit more than you want to carry around. My American had to be glass bedded before the fliers went away. Now the first three shots ( with handloaded ammo ) will fall into a little over 1/2". Next two shots will be together but about 1/2 " high. Wait for the barrel to cool and the next shot will punch into the first three. So.........for a hunting rifle, that is really good accuracy. I suspect the varmint would be a little more stable. My MTR has no problem putting multiple shots into the same tight cluster, never needed to do anything but adjust the trigger right out of the box.....................H322 is my powder of choice...............hope this helps.........Don in SC
Comment
-
-
Give Calhoun a call and order one of his single round feed block for your CZ. The call and pursuing conversation you will have with him will be worth the price tag and then you will also receive a fine product. He is a gem to deal with. My feed block lives in my rifle and only gets replaced with a magazine when I am taking rifle into the field on a hunt.
Comment
-
-
Originally posted by A5BLASTER View PostCZ says it's perfectly fine and safe to single feed. I have done it a good bit with mine and have had zero problems.
I keep seeing folks say you have too run the bolt with your thumb from the back of the bolt. I have never had to do that and can't understand for the life of me why when someone would have to be doing this. Why you wouldn't try to figure out why and fix it.
But I have said before. If I could take the barrel, trigger and mag from the cz and put it on the howa action. It would be the perfect bolt action grendel.
Back on topic, at my age I am too cantankerous to spend a lot of time fiddling with a gun. My CZ came generously insetted. After I shot it few times to confirm it was a keeper, I installed Pilars, let the epoxy cure for a few days, taped the stock, sprayed Spam on all of the metal parts and glass bed the action. It shoots better that I can. My 300 yd 10 round groups are about 1 1/4 to 1 1/2 MOA. But, the inner 3 to 5 holes are a clover leaf or at least touching. Good enough for the girls that I hunt with! Would I buy another CZ, YES.Last edited by Sinclair; 08-27-2020, 04:18 AM."A Patriot must always be ready to defend his Country against his government"
Edward Abbey
"Stay out of trouble, Never give up, Never give in, Watch you're six, Hold the line, Stay Frosty."
Dr. Sabastian Gorka, Hungarian by birth, American Patriot by Beliefs.
Comment
-
-
I have the Ruger. It's a nice rifle that goes bang dependably. The bolt was a little rough when I first got it but proper cleaning smoothed things out. It does use an AR type mag so given a choice of recipes the one with the shorter COAL will definitely play a role in which one I use.
Comment
-
-
I gave my Ruger to a good friend of mine and he shot it this past week. SUB Moa at 200 for five shots. I shot my CZ yesterday and fired the tightest group I've produced off a bipod. The first round hit a little low but the next four, felt great and went great, piling into .7 inches. My spotter said I would regret that first round and she was right. The whole group was .8MOA. Superb rifle. Shoots far better than I do.~Riuma
Comment
-
-
Hello everyone, didn't get notifications for this thread.
I've decided to go howa route for my son for deer (10yr old).
howa mini HB 6.5gr or 6arc if available by then.
B&C m40 and hinged bottom metal.
topped with a vx2 2-7x33 until scope is upgraded. ill just get a 223ai or 6arc barrel for my bighorn origin for myself.
Comment
-
-
I purchased the MR-131K shotgun because it offers great versatility. Because of the fact that it provides two magazines at once, a tubular underbarrel magazine and a box magazine. It is one of the most affordable with a good range. There are many modifications of the shotgun available, from the budget version in plastic to the piece shotguns with rich decorative finishes. I don't think it would be too difficult to purchase ammo. I also want to try to put a 380 Auto pistol clip on it. I will not change my gun anytime soon. It suits me completely.Last edited by ArmaniDunn; 10-11-2022, 09:54 AM.
Comment
-
Comment