load dev lehigh 110 match solids & 110 controled chaos

[Scout175]

That's some outstanding precision Mel. Just got 2 boxes of the lehighs and happen to have some PPV on hand too. I'll do a ladder with my AR 20 inch, find some nodes, and test for accuracy. My gun shoots the Barnes 115 TAC TX BTs extremely well at 2640 fps with Ar-comp. Haven't been able to find any more of that powder. Hope to get the same or better from the lehighs with comparable speed if not better speed with PPV.

[mel]

That's some outstanding precision Mel. Just got 2 boxes of the lehighs and happen to have some PPV on hand too. I'll do a ladder with my AR 20 inch, find some nodes, and test for accuracy. My gun shoots the Barnes 115 TAC TX BTs extremely well at 2640 fps with Ar-comp. Haven't been able to find any more of that powder. Hope to get the same or better from the lehighs with comparable speed if not better speed with PPV.

use mag primers with the ppv specially if its cold out , i started running into issues with std primers at 28.5-29g

if this snow ever quits im going to continue working my way up to 30+g of ppv and see what i can get out of theese , im estimating max load to be somewere in the 30.5-31g range

[sundowner]

I picked up 2 boxes of the controlled chaos , will be using H335 and 8208xbr when it warms up here . Will be a good test for the Labradar I just got .

[mel]

i freaking love theese 110 match solids , 450y accurate af out of my 28 , thats a 2 inch diam center on my gong

[mel]

bumping to the top need my data lol, loading 5 at 29.3 and 5 at 29.5 to tst out of the new 12 inch gren pistol tom

[tdbru]

Mel,
you should get an extreme difference between the 12" pistol and the 28" overwatch. should be interesting.
-tdbru

[mel]

Mel,
you should get an extreme difference between the 12" pistol and the 28" overwatch. should be interesting.
-tdbru

out of the 10" shorty they went 2240fps @ 29g out of the 12 at the higher charges i should see about 2350-2400fps i think, im pretty sure they will go close to 2900 out of the 28 when i bring the load up closer to max load.
The last worked up with perfect accuracy was only 29.2g and max will be more like 30.6 need to see if i have another accuracy node in the 28 before i hit max load

[Pootyng]

Following. I used these with 8208 (CC)

[mel]

its been a while and i wanna play so i loaded up a box of theese at 29.2g with cci 450's toput on the 6 inch 600yard gong tommorow out of my 28 inch bareled grendel

[mel]

time to see were the next node is so i have have 2 test groups loaded at 29.5 and 29.8g ppv to start also have a refrence batch at 29.2 which has been my goto load since i first tested theese out

[mel]

theese rounds never cease to amaze me
weather conditions 91* 11% humidity and 10mph wind
Range - 204 yards
target dot = .750
single digit es/sd
top dot = match solid
3 center dots = controlled chaos
groups would be even smaller with my glass scope

[doofus65]

Nice write up. What's that attachment at the front end of your scope?

[mel]

Nice write up. What's that attachment at the front end of your scope?

rangefinder

[Parabellum55]

Lately i have been developing loads around hammer bullets, similar solids but different bullet design. they make 85, 97,and 110s that have excellent terminal performance (bang flop) and they go fassssst. I have been shooting ar comp in the 97s and 110s but am getting power pro varmint today for the 85's. Ill post some data and pics when I get them on the lab radar. I have been shooting 120 ttsx for the last 2 years but and going to shoot pigs and yotes this month and will report back on performance in the field. I urge you all to check out the hammer time forum, these are some very interesting bullet designs and loading details like no other bullet I have ever used but the results are evident, made for hunters by hunters. SPEED KILLS

Its expensive but powder IS available on Gunbroker

[Parabellum55]

magnetospeed crono